1 1

powerresins

BURN2

BURN2

$280.00 USD
$280.00 USD
Sale Sold out
Weight
%100 Ash-Free Rapid Burnout Castable Resin

PowerResins BURN 2 resin is reformulated as %100 ash-free castable resin for excellent quality speed burnout for dental direct metal partial frameworks, chrome-cobalt casting as well as excellent for lithium disilicate press applications for inlay, onlay and overlay, laminate and veneer models. You will not face with any investment cracks or expansion during your casting process and can be used with any dental investment/gypsoms brand.

  • 100% ash-free burnout for dental fast burnout chrome cobalt casting
  • No investment cracks or expansion
  • Lithium disilicate inlay, onlay, overlay, laminate and veneer models
  • Produced under ISO standarts 13485:2016
  • Find here validated DLP, LCD 3D printers list

    View full details

    Product Description

    Product Features

    • 100% ash-free burnout for dental fast burnout chrome cobalt casting
    • No investment cracks or expansion
    • Lithium disilicate inlay, onlay, overlay, laminate and veneer models
    • Produced under ISO standarts 13485:2016
    • Find here validated DLP, LCD 3D printers list

    Material Properties

    >
    Material
    Properties    		ValueStandard
    Flexural
    strength    		20.7 MpaASTM D790-02
    Flexural
    modulus    		472 MpaASTM
    D790-02
    Tensile
    Strength    		14.4 MpaASTM D638
    Density1.08
    g/cm3 at 23 C    		ASTM
    D1475
    Shore
    Hardness    		70.5 DASTM
    D2240
    Viscosity490
    - 510 mPa.s at 23 C    		DIN 53211-4
    ColorGreen

    Post Process

    1- Washing

    After the printing is completed, wash the part as attached to the building plate with ethyl alcohol (>%90) or isopropyl alcohol (>%90) for 5 minutes. Make sure that alcohol covers the part entirely when washing. Do not over-wash, it may cause deterioration in dimensions of the part.

    2- Drying

    Use air-compressor to dry the washed part. Make sure that the part is dry and uncured resin is cleaned up completely. If still uncured resin left on the part, wash it with fresh alcohol and dry again.

    3- Part Removal

    Remove the printed part from the building plate using a scraping tool. Be very careful not to damage your hand and the model.

    4- No need post UV curing! Enjoy your casting.

    Storage Conditions

    Store the PowerResins Temp bottle in dark and moisture free place at room temperature (20-24 °C).

    Do not forget shaking the resin well before use.

    If your printer has heater, you can set the temperature at 32 °C. Otherwise, you can heat your resin in a microwave for 18 seconds or by submerging in hot water for 15-20 minutes.

    • 100% ASH-FREE CASTABLE

      Specially made for direct casting. Evaporates with heat leaving no ash.

    • NO NEED POST CURING

      After printing wash and dry yet it is ready to proceed rapid dental casting.

    • E-MAX PRESS APPLICATIONS

      Empress Lithium disilicate inlay, onlay, overlay, laminate and veneer models.

    • PERFECT FITTING

      High accuracy and perfect fitting margin lines for your castable applications