1- Washing
After the printing is completed, wash the part as attached to the building plate with ethyl alcohol (>%90) or isopropyl alcohol (>%90) for 5 minutes. Make sure that alcohol covers the part entirely when washing. Do not over-wash, it may cause deterioration in dimensions of the part.
2- Drying
Use air-compressor to dry the washed part. Make sure that the part is dry and uncured resin is cleaned up completely. If there is still uncured resin left on the part, wash it with fresh alcohol and dry again.
3- Part Removal
Remove the printed part from the build plate using a scraping tool. Be very careful not to damage the model.
4- Post Curing
Post curing application does not significantly affect the Gingiva resin's mechanical properties. However, post-curing helps to remove the stickiness on the printed pieces; thus, the following process is suggested for easy use: 10 minutes with MEDIFIVE curing chamber at 3rd-degree light intensity Otoflash curing recommendations 1000 flashes without gas.
