1 5

powerresins

MODEL

MODEL

$155.00 USD
$155.00 USD
Sale Sold out
Weight

 

Precision Models for Digital Dentistry

PowerResins Model resin is a specially formulated ceramic-based 3D printing dental model resin, having exceptional dimensional accuracy, less shrinkage rate, unique texture and colour. Printing fixed or removable dental prostetics, crown and bridge removable die models, implant analog models, wax-up models and thermoforming models orthodontic aligners are made easy now.

  • High detailed prints, easy to control margin lines and anatomical details
  • Thermoforming models for orhodontic applications
  • MMA free organic chemistry formulation, not smelly
  • Produced under ISO standarts 13485:2016
  • Find here validated DLP, LCD 3D printer list

    View full details

    Product Description

    Product Features

    • High detailed prints, easy to control margin lines and anatomical details
    • Thermoforming models for orhodontic applications
    • MMA free organic chemistry formulation, not smelly
    • Produced under ISO standarts 13485:2016
    • Find here validated DLP, LCD 3D printer list

    Material Properties

    Material PropertiesValueStandard
    Tensile strength26.2 MpaASTM D638
    Flexural strength99 MpaASTM D790-02
    Flexural modulus2640 MpaASTM D790-02
    Shore Hardness76.75 DASTM D2240
    Density1.1 g/cm3 at 23 CASTM D1475
    Viscosity200-225 mPa.s at 23 CDIN 53211-4
    ColorLight Pink

    Post Process

    1- Washing

    After the printing is completed, wash the part as attached to the building plate with ethyl alcohol (>%90) or isopropyl alcohol (>%90) for 5 minutes. Make sure that alcohol covers the part entirely when washing. Use a brush to remove uncured resin if needed. Do not over-wash, it may cause deterioration in dimensions of the part.

    2- Drying

    Use air-compressor to dry the washed part. Make sure that the part is dry and uncured resin is cleaned up completely. If still uncured resin left on the part, wash it with fresh alcohol and dry again.

    3- Part Removal

    Remove the printed part from the building plate using a scraping tool. Be very careful not to damage the model.

    4- Post Curing

    You can reach 99 MPa flexural strength after curing Please cure 20 minutes with MEDIFIVE curing chamber at 3rd-degree light intensity Otoflash curing recommendations; 10000 flashes without gas. After post curing, supports should be removed from the model cautiously.

    Storage Conditions

    Store the PowerResins Model bottle in dark and moisture free place at room temperature (20-24 °C).

    Do not forget shaking the resin well before use.

    If your printer has heater, you can set the temperature at 32 °C. Otherwise, you can heat your resin in a microwave for 18 seconds or by submerging in hot water for 15-20 minutes.

    • HIGH DETAILED PRINTS

      Print all study models with a great details and see all margin lines and anatomical details.

    • LOW SHRIKAGE

      PowerResins Model having a low shrinkage rate and will not change the shape after post-curing.

    • VACUUM FORMING

      Pressure resistant for thermoforming vacuum applications for ortodontic models.

    • GOOD COLOR

      Allows you to check all anatomical details with not tiring the eyes.